New Page 1

RELEASE APPLICATION

RADSIL UV RELEASE COATINGS may be applied by many different processes varying from direct gravure to flexographic methods. RADSIL UV Release Coatings are compatible with any Acrylic or Rubber based laminating or pressure sensitive adhesive. The variables that control release properties are the chemistry of the adhesive as well as proper curing and film weight. Higher film weights tend to seal more of the substrate allowing less of the adhesive to attach itself to the substrate forming another bond. We recommend that the application of the release coating for varying film weights be examined carefully for the best results.

RADSIL™ PRODUCT GUIDE

RADSIL™ PRODUCT	PEEL STRENGTH	VISCOSITY	WEIGHT per US Gal.	See DATA SHEET?
RAD-1001G	1-3 grams per inch	135 cps	8.9 lbs.	Click Here
RAD-1002G	1-2 gms./in.	135 cps	8.9 lbs.	Click Here
RAD-1003G	90-100 gms./in.	135 cps	8.9 lbs.	Click Here
RAD-1004G	2-3 grams per inch	135 cps	9.0 lbs.	Click Here
RAD-1005G	1-2 gms./in.	175 cps	8.9 lbs.	Click Here
RAD-1006G	1-2 gms./in.	200 cps	8.9 lbs.	Click Here
RAD-1007F (Low Gloss)	1-2 grams per inch	300 cps	9.2 lbs.	Click Here
RAD-1008G	5-10 gms./in.	200 cps	9.2 lbs.	Click Here
RAD-1009G	3-5 gms./in.	200 cps	9.3 lbs.	Click Here
RAD-1010G	3-5 grams per inch	200 cps	9.2 lbs.	Click Here
RAD-1011G	90-100 gms./in.	200 cps	9.2 lbs.	Click Here
RAD-1012G	15-20 gms./in.	135 cps	9.0 lbs.	Click Here
RAD-1013G	1-2 gms./in.	65 cps	8.9 lbs.	Click Here

To learn more about RADSIL products, please contact us at: RADSIL@uvexperts.com

For Order Information, please contact Trilogy Chemicals at (630) 215-5082

To the best of our knowledge the information contained herein is accurate. However, neither ECC Technologies nor its or affiliates assume any liability whatsoever for the accuracy or completeness of the information contained herein. The information is made available to assist you in determining possible applications of our products. Since the applications and conditions of use are beyond our control, we assume no responsibility in connection with any use, whether the use is in accord with suggestions contained herein or not. Nothing herein shall be construed as a recommendation to use any product in conflict with existing laws or patents covering any products or applications. Final determination of the suitability of any information or material for the use contemplated the manner of the use or whether there is any infringement of patents is the sole responsibility of the user.