New Page 1

SURFACE TEXTURING

RADTEX FBSC SERIES COATINGS may be surfaced textured when processed through a Lindeā Photo-Cure System equipped with Selective Texturing System (STS) module. The variables that control surface texturing are: coating film thickness, intensity of exposure to the lamps in the STS module, temperature of the coating when applied and the color of the substrate. Generally thin coating films produce a fine texture while thick film deposits produce a coarse surface texture. The intensity of the exposure to the STS module is controlled by, the duration of exposure, the number and position of the lamps and the dwell time between the STS module and the main curing lamps. This is controlled is controlled by the belt speed and relative position of the lamps. Typically short exposure duration will produce shallow textures while long durations produce deep surface textures.

*STS is a trademark of the Union Carbide Corporation, Linde Division
*Wet Directā is a registered trademark of T-W Graphics

RADTEX™ PRODUCT GUIDE

RADTEX™ PRODUCT	GLOSS	VISCOSITY	WEIGHT per US Gal.	See DATA SHEET?
FBSC-12G	85-95% (60° glossmeter angle)	4500 cps	9.4 lbs.	*Click Here*
FBSC-21F	8-10% (60° glossmeter angle)	4000 cps	9.4 lbs.	*Click Here*
FBSC-22F	8-10% (60° glossmeter angle)	1500 cps	9.4 lbs.	*Click Here*
FBSC-25F	8-10% (60° glossmeter angle)	1100 cps	9.4 lbs.	*Click Here*
FBSC-27F	6-8% (60° glossmeter angle)	3500 cps	9.4 lbs.	*Click Here*
FBSC-28F	8-10% (60° glossmeter angle)	4500 cps	9.3 lbs.	*Click Here*
FBSC-29F	6-8% (60° glossmeter angle)	4000 cps	9.4 lbs.	*Click Here*
FBSC-31F	8-10% (60° glossmeter angle)	3200 cps	9.3 lbs.	*Click Here*
FBSC-35F-NVPF	9-11% (60° glossmeter angle)	1000 cps	9.5 lbs.	*Click Here*

To learn more about RADTEX products, please contact us at: RADTEX@uvexperts.com

For Order Information, please contact Trilogy Chemicals at (630) 215-5082

To the best of our knowledge the information contained herein is accurate. However, neither ECC Technologies nor its or affiliates assume any liability whatsoever for the accuracy or completeness of the information contained herein. The information is made available to assist you in determining possible applications of our products. Since the applications and conditions of use are beyond our control, we assume no responsibility in connection with any use, whether the use is in accord with suggestions contained herein or not. Nothing herein shall be construed as a recommendation to use any product in conflict with existing laws or patents covering any products or applications. Final determination of the suitability of any information or material for the use contemplated the manner of the use or whether there is any infringement of patents is the sole responsibility of the user.