FBSC-35F DS

RADTEX™ Screen Coating

FBSC-35F-NVPF

Description

Radtex™ FBSC-35F-NVPF is a high performance texturable screen coating designed for applications where a rough texture and controlled pattern are required. This coating exhibits low gloss, good flow, leveling with excellent texture continuity, low viscosity and excellent adhesion to polycarbonate.

Application Data

Method:	Flat-bed screen 330 mesh
Film Weight:*	1.75 lb./1000 sq. ft.
Clean Up Solvent:	MEK or high boiling glycol ethers.

Compatibilities

This coating can be applied over a variety of plastic substrates. Some plastics may require pretreatment for better adhesion properties.

*	*Film weight based on averaging of historical information on equipment applications*

PERFORMANCE FEATURES **

Excellent Abrasion Resistance
Good Adhesion --
(5x5 adhesion: 100%)
Good Chemical Resistance --
MEK [dbl. rubs]: 50+
Low Gloss
Lower Viscosity
Provides Rough, Controlled Pattern
Contains Migratory Lubricant

PHYSICAL PROPERTIES:
Appearance:	Cloudy
Weight/U.S. Gallon:	9.5 lbs.
Brookfield Viscosity:	1000 cps +/- 10% @25°C
Gloss:	9 - 11% reflectance (@ 60° glossmeter angle)
Cure:	20 ft/min./lamp (Linde™)

**	*Based on testing using laboratory methodologies with cured samples*

For Order Information, please contact Trilogy Group at (630) 215-5082

The information contained herein is based on tests and reports considered reliable but is presented without guarantee or
responsibility as to the applicability, correctness of this information or the suitability of our products whether used singly
or in combination with other products. The product referred to above is sold without warranty, expressed or implied.