New Page

RADTEX™ Screen Coating

FBSC-12G

Description

Radtex™ FBSC-12G screen coating is designed for applications where excellent abrasion resistance is required. FBSC-12G will exhibit good cured properties in either air or nitrogen atmosphere. This coating offers high gloss and a high degree of hardness while maintaining excellent flexibility and good adhesion to polycarbonate.

Application Data

Method:	Flat-bed screen 330 mesh
Film Weight:*	1.75 lb./1000 sq. ft.
Clean Up Solvent:	MEK or high boiling glycol ethers.

Compatibilities

This coating can be applied over a variety of plastic substrates. Some plastics may require pretreatment for better adhesion properties.

*	*Film weight based on averaging of historical information on equipment applications*

PERFORMANCE FEATURES **

Excellent Abrasion Resistance
Good Adhesion --
(5x5 adhesion: 100%)
Good Chemical Resistance
MEK [dbl. rubs]: 50+
High Gloss
Excellent Flexibility
Contains Migratory Lubricant

PHYSICAL PROPERTIES:
Appearance:	Cloudy
Weight/U.S. Gallon:	9.4 lbs.
Brookfield Viscosity:	4500 cps +/- 10% @25°C
Gloss:	85-95% reflectance (@ 60° glossmeter angle)
Cure:	25 ft/min./lamp (Linde™) 50 ft/min./lamp (200 watts in air)

**	*Based on testing using laboratory methodologies with cured samples*

For Order Information, please contact Trilogy Group at (630) 215-5082

The information contained herein is based on tests and reports considered reliable but is presented without guarantee or
responsibility as to the applicability, correctness of this information or the suitability of our products whether used singly
or in combination with other products. The product referred to above is sold without warranty, expressed or implied.