RADTEX™ Screen Coating

FBSC-22F

 ECClogo.gif (2476 bytes)
Description

Radtex™ FBSC-22F is a very fine textured screen coating designed for automotive applications. This coating exhibits low gloss, good flow, and a high degree of hardness while maintaining excellent flexibility and texture continuity, low viscosity and excellent adhesion to polycarbonate.


Application Data

Method: Flat-bed screen 330 mesh
Film Weight:* 1.75 lb./1000 sq. ft.
Clean Up Solvent: MEK or high boiling glycol ethers.


Compatibilities

This coating can be applied over a variety of plastic substrates. Some plastics may require pretreatment for better adhesion properties.

* Film weight based on averaging of historical information on equipment applications
   PERFORMANCE FEATURES **
  • Excellent Abrasion Resistance
  • Good Adhesion --
    (5x5 adhesion: 100%)
  • Good Chemical Resistance --
    MEK [dbl. rubs]: 50+
  • Low Gloss
  • Excellent Flexibility
  • Good Flowout / Coverage
  • Contains Migratory Lubricant
PHYSICAL PROPERTIES:
Appearance: Cloudy
Weight/U.S. Gallon: 9.4 lbs.
Brookfield Viscosity: 1500 cps +/- 10% @25°C
Gloss: 8 - 10% reflectance
(@ 60° glossmeter angle)
Cure: 25 ft/min./lamp
                    (Linde™)
** Based on testing using laboratory methodologies with cured samples

 

 

For Order Information, please contact Trilogy Group at (630) 215-5082

The information contained herein is based on tests and reports considered reliable but is presented without guarantee or
responsibility as to the applicability, correctness of this information or the suitability of our products whether used singly
or in combination with other products. The product referred to above is sold without warranty, expressed or implied.

Copyright © 1999 Trilogy Group, LLC                                 If problems viewing this page, please contact:
                                                                                              webmaster@uvexperts.com

 

RADTEXä TEXTURABLE SCREEN COATINGS

Product Code: FBSC-22F

Description: Radtex™ FBSC-22F is a very fine textured screen coating designed for automotive applications. This coating exhibits low gloss, good flow, and a high degree of hardness while maintaining excellent flexibility and texture continuity, low viscosity and excellent adhesion to polycarbonate.

 

Physical Characteristics:

Vis: 1500 cps +/-10%[RVT Brookfield @25° C]

WpG: 9.4 lbs.

Cure: 25 ft/min/lamp* (Lindeä )

Gloss: 8-10% reflectance @60° glossmeter angle

 

Performance Features:**

5x5 adhesion: 100%

MEK [dbl. rubs]: 50

Appearance: Cloudy

Migratory lubricant: Yes

 

Application Data:

Method: Flat-bed screen 330 mesh

Film Weight:*** 1.75 lb./1000 sq. ft.

Clean Up Solvent: MEK or high boiling

glycol ethers.

 

Compatabilities: This coating can be applied over a variety of plastic substrates. Some plastics may require pretreatment for better adhesion properties.

** Based on testing using laboratory methodologies with cured samples

*** Film weight based on averaging of historical information on equipment applications

The information contained herein is based on tests and reports considered reliable but is present without guarantee or responsibility as to the applicability, correctness of this information or the suitability of our products whether used singly or in combination with other products. The product referred to above is sold without warrantee, expressed or implied