Tech Bulletin for ICM SF 203

ICM SF 203
100% Alyklmethyl Silicone polymer

ICM_weblogo.gif (1693 bytes)

ICM SF 203 is a 100% active alkylmethyl silicone polymer with a viscosity of 1200 centistokes.
It is a colorless-to-light yellow liquid silicone polymer that is used as a release agent for
molding, extruding, and fabricating rubber and plastic parts. ICM SF 203 does not impair the
adhesion or alter the appearance of most coatings.

ICM SF 203 withstands molding temperatures, resists oxidation, and does not smoke, break
down, carbonize, or build up on molds and dies.

It can be applied by painting, spraying, or used as an internal release agent in many systems.

TYPICAL PROPERTIES:

Appearance ------------------- Clear Liquid

Specific gravity @ 25 ºC ----------- 0.91

Viscosity @ 25 ºC ------------------ 1200

Color(APHA) -------------------------- 10

Flash(COC) ºF -------------------- 450 ºF

APPLICATIONS:

Release Aid for molding, extrusion, laminating, casting of: Rubber, Plastics, Metal
Foundry Release

ICM SF 203 is available in 35 pound pails or 400 lb drums.

Store in original container in a cool, well-ventilated area.

SPECIAL USE AND SAFE HANDLING INFORMATION:
See Material Safety Data Sheet for details.

To Order, contact Trilogy Chemicals at (630) 215-5082.

These data are offered in good faith as typical values and not as a Product Specification. No warranty, either
expressed or implied, is hereby made. The recommended industrial hygiene and safe handling procedures are
believed to be generally applicable. However, each user should review these recommendations in the specific
context of the intended use and determine whether they are appropriate.